Sản phẩm
- Thứ năm - 05/04/2018 10:25
- In ra
- Đóng cửa sổ này
AC/DC > Enclosed- Enclosed Switching Power Supply
G3 Series
Wattage :
15W~150WFeatures :
Miniature size, non-PFC
5G vibration, 70℃ operation
300VAC input surge
Suitable for critical applications
2 outputs are isolated for RID series
NE Series
LRS Series
Wattage :
35W~350WFeatures :
Non-PFC, most economical models
Ultra compact and 1U low profile
300VAC input surge
No load power consumption: 0.2W~0.75W
5G vibration, 70℃ operation
Operating altitude up to 5000 meters
Complete safety certificates: IEC/EN60335-1(PD3), IEC/EN61558-1, -2-16; IEC/EN/UL60950-1 and GB4943
SE Series
PFC Series
UHP Series
Wattage :
200W~500WFeatures :
Slim and Low profile (26~31mm)
Fanless design,free air convection
Built-in active PFC function150%
peak load capability(100ms)
DC OK active signal and redundant function(option)
Operating altitude up to 5000 meter (Note.5)
LED indicator for power on
U-Bracket
RSP-75~500 Series
Wattage :
75W~500WFeatures :
1U Low profile with active PFC function: 75W~320W: 30 mm, 500W: 40.5 mm
Built-in constant current limiting circuit (RSP-75/100/150)
Built-in remote ON/OFF control (RSP-75/100/150/500)
Built-in remote sense (RSP-500 only)
G5 Series
MSP Series
HEP Series
Wattage :
100W~600WFeatures :
90~305VAC with PFC
Fanless design
High efficiency up to 96%
Wide working temperature range -55~+70℃(-40~+70℃ for HEP-600, -55~+65℃ for HEP-480)
Rugged metal case with IP65 design (IP68 option available), withstand 10G vibration
Operating altitude up to 5000 meters
Suitable for high/low temperature, high dust, high moisture, high vibration, high salt outdoor or harsh environment
6 years warranty
AC/DC > DIN Rail- DIN Rail Power Supply
HDR Series
Wattage :
15W~100WFeatures :
Plastic case, step shape
1∅, full range input
Compact size, 1SU~3SU width (DIN EN43880)
Isolation class II
DC output voltage adjustable
No load power consumption <0.3W
Assemble on industrial rail TS-35 / 7.5 or 15
Suitable for building automation and control of household appliance
MDR Series
Wattage :
10W~96WFeatures :
Plastic case, ultra slim
1∅, full range input
No load power consumption<0.75W~1W
Assemble on industrial rail TS-35 / 7.5 or 15
Built-in active PFC function
DC OK signal output (MDR-10/20)
DC OK relay contact (MDR-40/60/100)
Class I, Div 2 Hazardous Locations T4 (MDR-40/60)
DRA Series
DR Series
DR/DRP Series
DRH/DRT Series
EDR Series
NDR Series
SDR Series
Wattage :
75W~960WFeatures :
Metal case, slim size
1∅, full range input (230VAC only for SDR-960)
94% high efficiency and complete functions
Built-in active PFC function (except SDR-75)
Assemble on industrial rail TS-35 / 7.5 or 15
Built-in DC OK relay contact (except SDR-75)
130%~150% peak load capability by models
Current sharing function (SDR-480P/960)
TDR Series
WDR Series
AC/DC > Open Frame- Open Frame Switching Power Supply
Industrial - On Board Type
Wattage :
1W~60WFeatures :
Assemble on the main PCB of the system
Miniature encapsulated type
No load power consumption<0.075W~0.1W
Working temperature:-30~+85℃ by models
Comply with EN55022 class B without any additional components
Various styles: PIN, SMD, Screw terminal style
Industrial - Green PCB Type
Wattage :
15W~400WFeatures :
3" x 2", 4" x 2", 5" x 3" complete sizes for choice
PFC models: EPP, ELP series;
Non-PFC models: EPS series
No load power consumption <0.1W~0.5W
Suitable for ErP regulated end systems
Industrial - PCB Type
Wattage :
5W~250WFeatures :
PCB type, non-PFC for small wattage models
Multiple form factors for different installations: 7" x 4.25”, 5” x 3”, 4” x 2”, slim type
Medical - On Board Type
Wattage :
5W~30WFeatures :
Assemble on the main PCB of the system
Medical safety approved (2xMOPP)
Suitable for BF application with appropriate system consideration
Medical - PCB Type
Wattage :
30W~400WFeatures :
Compact size, 3"x2" for RPS-30/45/65; 4"x2" for RPS-120/200
PCB type, non-PFC for small wattage models
Medical safety approved (2xMOPP)
Low leakage current
Suitable for BF application with appropriate system consideration for selected models
AC/DC > Specific Purpose- Specific Purpose Power Supply
ATX PC Power
Security-DIN Type
Security-Enclosed Type
Security-PCB Type
Moving Sign Series
Wattage :
150W~400WFeatures :
PFC: HSP, HDP series, UHP series
Non-PFC: HSN, NEL, ERP series
Light weight and low profile
HSP series—2.5V, 2.8V, 3.6V, 3.8V, 4.2V, 5V
HSN series—4.2V, 5V
NEL series—2.8V, 4.2V, 5V
HDP series—V1: 2.8V, V2:3.8V
ERP series—24V, 36V, 48V
UHP series—4.2V,4.5V,5V
Suitable for high efficiency moving sign applications
Conformal coating (HSP, HDP, NEL, HSN series)
Semi-potted and design against rain splash (ERP-350)
AC/DC > PV Power- Programmable Power Supply
DPU Series
Wattage :
3200WFeatures :
Universal AC Input/ Full Range
Built-in Active PFC
High efficiency up to 94.5%
air cooling by built-in DC fan
Output voltage and constant current level programmable
Built-in OR-ing FET, support hot swap (hot) plug function
Protection: Short Circuit/ Overload / Over voltage/ Over temperature
Optional conformal coating
Safety approval: UL/TUV/EAC/CE/CB
5 years warranty
Model
DPU-3200： DPU-3200SPV Series
RST Series
Wattage :
5000W~10000WFeatures :
Single output power supply with 5000W / 10000W high wattage
3 phase input:3-wire / △196~305VAC or 4-wire / Y340~530VAC
Built-in active PFC function
High efficiency up to 91%
20000W with built-in parallel (active current sharing) function
Output voltage and constant current level programmable
5 years warranty
RSP-750~3000 Series
Wattage :
750W~3000WFeatures :
Programmable high power with active PFC function
Output voltage programmable
Constant current level Icc programmable (RSP-750/1600 only)
1U low profile (41mm) : RSP-750/1000/1600/2000,
2U profile : RSP-1500/2400/3000
Built-in current sharing (except RSP-750)
5 years warranty
AC/DC > Rack Power- 19" Rack Power Unit
RCP Series
AC/DC > Modular- Configurable Power Supply
MP Series
AC/DC > LED Driver- LED Driver
AP Series
Wattage :
8W~35WFeatures :
90~264VAC input
Rectangular plastic case with IP42 level
Class II design, without FG
Low cost, small and compact size
Constant voltage mode for APV series
Constant current mode for APC series
Suitable for indoor LED lighting and moving sign applications
AP-E Series
Wattage :
8W~16WFeatures :
180~264VAC input only
Rectangular plastic case with IP42 level
Class II design, without FG
Low cost, small and compact size
Constant voltage mode for APV-E series
Constant current mode for APC-E series
Suitable for indoor LED lighting and moving sign applications
CEN Series
CLG Series
Wattage :
60W~150WFeatures :
- 90~295VAC input, built-in active PFC function
- Metal case, IP67/IP65 design for indoor or outdoor installations
- Output current adjustable through output cable or internal potentiometer (CLG-150)
- Suitable for LED street lighting, outdoor LED lighting and moving sign applications
ELG Series
Wattage :
75W~240WFeatures :
100~305VAC input range
Built-in active PFC function
No load/standby power consumption <0.5W
Metal case, IP67/IP65 design for indoor or outdoor installations
Function options:
output adjustable via potentiometer; 3 in 1 dimming (0~10Vdc or 10V PWM signal or resistance, dim-to-off); smart timer dimming; DALI; auxiliary DC output (ELG-150 BE-Type)
Type "HL" LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries
Suitable for LED street lighting and outdoor LED lighting
5 years warranty
ELG-C Series
Wattage :
75W~240WFeatures :
100~305VAC input range
Constant current (C.C.) output
Built-in active PFC function
No load/standby power consumption <0.5W
Metal case, IP67/IP65 design for indoor or outdoor installations
Function options:
output adjustable via potentiometer; 3 in 1 dimming (0~10Vdc or 10V PWM signal or resistance, dim-to-off); smart timer dimming; DALI; auxiliary DC output (ELG-150-C BE-Type)
Type "HL" LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries
Suitable for LED street lighting and outdoor LED lighting
5 years warranty
FDL Series
GSC Series
Wattage :
18W~40WFeatures :
90~277VAC input, built-in active PFC function
Constant current mode
Fully isolated plastic case with IP40 design
Class II design, without FG
IEC320-C8 inlet for B type,
2 pole EURO plug for E type
No load power consumption<0.15W
Suitable for indoor LED lighting
HBG(P) Series
Wattage :
60W~240WFeatures :
Circular shape design:
HBG-60 : plastic case; HBG-100/160/240 : metal case; HBG-60P/100P/160P/240P : PCB type
90~305VAC input, built-in active PFC function [90~295VAC for HBG-60(P)]
Circular shape design: HBG-60: plastic case, HBG-100/160/240: metal case HBG-60P/100P/160P/240P:PCB type
IP67/IP65 design for indoor or outdoor installations for HBG-100/160/240
Built-in 3 in 1 dimming function (1~10VDC, PWM signal, or resistance) for HBG-100(P)/160(P)/240(P) B type
Type "HL" LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries (HBG-100/160 only)
Suitable for LED high/low bay lighting, stage lighting and spot lighting
5 years warranty
Model
Case： HBG-60 / HBG-100(DA) /HBG-160(DA) / HBG-200(DA) /HBG-240(DA) / HBGC-300 PCB： HBG-60-P / HBG-100P(DA) /HBG-160P(DA) / HBG-240PHLG Series
Wattage :
40W~600WFeatures :
90~305VAC input, built-in active PFC function
96% high efficiency (HLG-600H)
Metal case, IP67/IP65 design for indoor or outdoor installations
Function options:
output adjustable via potentiometer; 3 in 1 dimming (1~10Vdc or 10V PWM signal or resistance); timer dimming
Type "HL" LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries
Suitable for LED street lighting, outdoor LED lighting and general outdoor applications with high IP requirement
IP68/-55℃ startup/10G vibration options available (Please contact MEAN WELL for details)
7 years warranty
HLG-C Series
Wattage :
70W~480WFeatures :
90~305VAC input, built-in active PFC function
Constant current output with high output voltage >60VDC
Metal case, IP67/IP65 design for indoor or outdoor installations
Function options:
output adjustable via potentiometer; 3 in 1 dimming (1~10Vdc or 10V PWM signal or resistance); timer dimming; smart timer dimming
Type "HL" LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries (HLG-240H-C/320H-C only)
Suitable for LED street lighting and outdoor LED lighting
7 years warranty
HSG Series
Wattage :
70WFeatures :
90~305VAC input, built-in active PFC function
Rectangular metal case
IP65 design for indoor or outdoor installations
Model
C.V.+C.C.： HSG-70HVG(C) Series
Wattage :
65W~650WFeatures :
Wide input range 180~528VAC
Metal case, IP67/IP65 design for indoor or outdoor installations
Built-in active PFC function
Function options:
output adjustable via potentiometer; 3 in 1 dimming (0~10Vdc or 10V PWM signal or resistance, dim-to-off); timer dimming; smart timer dimming
Type "HL" LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries (except for HVG-65 and HVGC-65/100)
Suitable for LED street lighting and outdoor LED lighting applications
5 years warranty
LDB-L/LW Series
Wattage :
300/350/500/600mAFeatures :
Constant current DC/DC buck-boost LED driver
High efficiency up to 91%
Comply with EN55015 and FCC part 15 without additional input filter and capacitors
PWM dimming and remote ON/OFF control
Suitable for buck-boost type lighting systems (additional mother board is required)
Pin, wire style for choice
Model
Buck-boost： LDB-LLDH Series
Wattage :
350/500/700/1050mAFeatures :
Constant current output DC/DC step-up LED driver
High efficiency up to 95%
Comply with EN55015 without additional any components
PWM+analog dimming and remote ON/OFF control
Suitable for boost type lighting systems (Additional mother board is required)
Pin, wire style for choice
Model
Step-up： LDH-45(DA)LP Series
Wattage :
18W~150WFeatures :
90~264VAC input (except for 18W and 150W)
Slim plastic case with IP67 level
Economical design
Withstand 300VAC surge input for 5 seconds (LPV/C-20/35/60/100)
-30~70℃ wide operation range
Suitable for economical LED lighting and moving sign applications
Type "HL" LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries (LPVL-150 only)
OWA Series
Wattage :
60W~120WFeatures :
IP67 design for power body
Class II design, without FG
2 pole USA plug (U type)/ EURO plug (E type)
90~264VAC input (180~264VAC input for OWA-120E)
No load power consumption <0.15W
Energy efficiency Level VI
E-Type: meet CoC Version 5 (OWA-60E/90E); comply with EU ErP
U-Type: comply with EISA 2007/DoE and NRCan
5 years warranty
PCD Series
Wattage :
16W~60WFeatures :
16W/25W: 90~135VAC or 180~295VAC 40W/60W: 180~295VAC
AC phase-cut dimming, work with leading and trailing edge TRIAC dimmers
Fully isolated plastic case with IP42 level
Built-in active PFC function
Class II design, without FG
Constant current mode
Suitable for indoor LED lighting
PLD Series
PLM Series
Wattage :
12W~40WFeatures :
110~295VAC input (180~295VAC input for E type)
Built-in active PFC function
Fully isolated plastic case with IP30 level
Class II design, without FG
Push terminal I/O
Constant current mode
No load power consumption<0.5W
Suitable for indoor LED lighting
ULP Series
Wattage :
150WFeatures :
90~295VAC input, built-in active PFC function
High efficiency up to 93%
U-bracket low profile: 33mm, suitable for built-in LED lighting systems
Model
C.V.： ULP-150ODL Series
Wattage :
45W~65WFeatures :
Constant current output mode (ODLC Series)
Constant voltage output mode (ODLV Series)
Flicker free design( ODLC Series)
Built-in active PFC function
Built-in 2 in 1 dimming function (0~10VDC or PWM signal, dim-to-off )
Suitable for indoor LED lighting applications
LDD-L Series
Wattage :
300/350/500/600/700mAFeatures :
- Constant current output DC/DC step-down converter
- High efficiency up to 97%
- Comply with EN55015 and FCC part15 without additional input filter and capacitors
- PWM dimming and remote ON/OFF control
- Protections: Short circuit / Over temperature
- Cooling by free air convection
- Fully encapsulated with IP67 level for pin and wire style
- Suitable for driving illumination LED
- 3 years warranty
Model
C.C： LDD-LLDD-H Series
Wattage :
300/350/500/600/700mAFeatures :
- Constant current output DC/DC step-down converter
- High efficiency up to 97%
- Comply with EN55015 and FCC part15 without additional input filter and capacitors
- PWM dimming and remote ON/OFF control
- Protections: Short circuit / Over temperature
- Cooling by free air convection
- Fully encapsulated with IP67 level for pin and wire style
- Suitable for driving illumination LED
- 3 years warranty
LDC Series
Wattage :
35W~80WFeatures :
Constant power output
Flicker free design
3 in 1 dimming：0~10Vdc、PMW signal or resistance
Built-in active PFC function
No load power consumption <0.5W
working temperature： -25~+90℃
Protections: short circuit /
UL/ENEC/TUV/CCC/CB/CE certified
5 years warranty
LPF Series
Wattage :
16W~90WFeatures :
90~305VAC input, built-in active PFC function (200~400VAC for LPFH-60/60D)
Fully isolated plastic case with IP67 level (16W optional)
Class II design, without FG
Built-in 3 in 1 dimming function for D type (1~10VDC, PWM signal or resistance)
Type "HL" LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries (LPF-90/90D & LPFH-60/60D)
Suitable for LED lighting and moving sign applications
5 years warranty
NPF Series
Wattage :
40W~120WFeatures :
90~305VAC input, built-in active PFC function
Fully isolated plastic case with IP67 level
Class II design, without FG
No load/standby power consumption<0.15W (<0.5W for D type)
Built-in 3 in 1 dimming function (0~10VDC, PWM signal or resistance, dim-to-off ) for D type
Type "HL" LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries [NPF-40(D)/-60(D)/-120(D) only]
Suitable for LED lighting and moving sign applications
5 years warranty
PWM Series
Wattage :
40W~120WFeatures :
90~305VAC input, built-in active PFC function
Fully isolated plastic case with IP67 level
Constant voltage PWM style output
Class II design, without FG
No load power consumption<0.5W
Built-in 3 in 1 dimming function (0~10VDC, PWM signal or resistance, dim-to-off)
Type "HL" LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries (PWM-40/60/120 only)
Suitable for LED strip lighting
5 years warranty
PLC Series
PLN Series
HLN Series
Wattage :
40W~80WFeatures :
90~305VAC input, built-in active PFC function
Fully isolated plastic case with IP64 level
Built-in 3 in 1 dimming function (1~10VDC, PWM signal or resistance) for B type
User adjustable output voltage and current level for A type
Suitable for indoor LED lighting and moving sign applications
LCM Series
Wattage :
25W~60WFeatures :
180~295VAC input for 40W/60W, 180~277VAC input for 25W
Constant current mode
Built-in active PFC function
Multiple-stage output current level selectable by DIP switch
Built-in 3 in 1 dimming function for non DA type (0~10VDC, PWM signal or resistance, dim-to-off)
Built-in DALI interface and push dimming function for DA type
Suitable for indoor LED lighting applications
LCM-U Series
Wattage :
40W~60WFeatures :
90~132VAC input only
Constant current mode
Built-in active PFC function
Multiple-stage output current level selectable by DIP switch
Built-in 3 in 1 dimming function for non DA type (0~10VDC, PWM signal or resistance, dim-to-off)
Built-in DALI interface and push dimming function for DA type
Suitable for indoor LED lighting applications
IDL Series
Wattage :
25W~65WFeatures :
Constant current output mode (IDLC Series)
Constant voltage output mode (IDLV Series)
Flicker free design (IDLC Series)
Built-in active PFC function
Built-in 2 in 1 dimming function (0~10VDC or PWM signal, dim-to-off )
Suitable for indoor LED lighting applications
PLP Series
IDP Series
Wattage :
25W~65WFeatures :
Constant current output mode(IDPC Series)
Constant voltage output mode(IDPV Series)
Flicker free design(IDPC Series)
Built-in active PFC function
Built-in 2 in 1 dimming function (0~10VDC or PWM signal, dim-to-off )
Suitable for built-in LED lighting systems
AC/DC > LED Accessory - LED Accessories
DAP-04
Wattage :
NAFeatures :
90~305VAC input
Convert DALI signal to PWM signal
4 DALI addressable output channels
Meet DALI standards(IEC62386-101,102,207)
Suitable to use along with MEAN WELL's AC/DC LED PSU with 3 in 1 dimming function
Model
DAP-04： DAP-04LED Strips
Wattage :
NAFeatures :
12V LED Strips
Uniform brightness, high stability
Tailored length per application demand
PIR-045
Wattage :
NAFeatures :
Built-in Passive Infrared sensor module
MCU controller, no relay contact
Adjustable off-time delay / dimming level / sensitivity
Model
： PIR-045POB Series
Wattage :
Features :
AC mains direct driving
Systematic efficacy >100 lm/w @3000K
CRI>80 ; PF> 0.95 ‧T.H.D. <20%
Easy installation and configuration
Model
： POB-30SDP-001
SPD Series
Wattage :
NAFeatures :
10kA/20kA surge protection device
Line to Ground & Line to Line protected
Suitable for surge protection of LED drivers
IP66/67 design for indoor or outdoor installations
WPD-06
Wattage :
NAFeatures :
EnOcean wireless control technology
Easy installation and configuration
6 protected and independent dimming output channels
Up to 128 wireless batteryless switches
Suitable for constant voltage lighting application
Up to 30 meter wireless distances
Model
： WPD-06AC/DC > Adaptor- External Switching Power Supply
Industrial - Desktop (Level V)
Wattage :
18W~280WFeatures :
Energy efficiency level V (GS series)
No load power consumption <0.3W~0.5W
Comply with EISA 2007, NRCan, MEPS and ErP
Fanless design with 0~50℃ working temperature
A type: Class I (with FG), IEC320-C14;
B type: Class II (no FG), IEC320-C8
DC plug changeable (MOQ may be required)
2 years warranty
Industrial - Desktop (Level VI)
Wattage :
15W~280WFeatures :
Global safety certificates for GST series :
UL, TUV, PSE, RCM, KC, SIRIM, BIS, EAC, BSMI, CCC
Energy efficiency Level VI
No load power consumption <0.075W~0.5W
Comply with EISA 2007/DoE, NRCan, MEPS, ErP and CoC Version 5
Fanless design with -30~+70℃ working temperature
A type: Class I (with FG), IEC320-C14;
B type: Class II (no FG), IEC320-C8
DC plug changeable (MOQ may be required)
3 years warranty
Industrial - Wall-mounted (Level V)
Wattage :
12W~36WFeatures :
Energy efficiency Level V
No load power consumption <0.3W~0.5W
Comply with EISA 2007, NRCan, MEPS and ErP
0~50℃ working temperature
2 pole USA (U type) / EURO (E type)
DC plug changeable (MOQ may be required)
2 years warranty
Industrial - Wall-mounted (Level VI)
Wattage :
5W~60WFeatures :
Energy efficiency Level VI
No load power consumption <0.075W~0.15W
Comply with EISA 2007/DoE, NRCan, ErP and CoC Version 5
-30~+70℃ working temperature
2 pole USA plug(U type) / EURO plug(E type) / Interchangeable type for GE series
Slim design for SGA series
DC plug changeable (MOQ may be required)
3 years warranty
Model
Fixed (USA 2 Pin)： GS05U-USB / GS06U /GS15U / GST18U /GST25U / GST36U Fixed (EURO 2 Pin)： GS05E-USB / GS06E /GS15E / GST18E /GST25E / GST36E Slim (USA 2 Pin)： SGA12U / SGA18U /SGA25U / SGA40U /SGA60U Slim (EURO 2 Pin)： SGA12E / SGA18E /SGA25E / SGA40E /SGA60E Slim (CH 2 Pin)： SGA40CH Interchangeable： GE12I / GE18I / GE24I /GE30IMedical - Desktop (Level VI)
Wattage :
18W~220WFeatures :
Medical safety approved (2xMOPP), BF application(B type only)
Energy efficiency Level VI (GSM06/18/25/36/40/60 5~9V: Level V)
No load power consumption <0.1W~0.15W
Comply with EISA/DoE, NRCan, ErP and meet CoC Version 5
A type: Class I (with FG), IEC320-C14;
B type: Class II (without FG), IEC320-C8
DC plug changeable (MOQ may be required)
3 years warranty
Medical - Wall-mounted (Level V / Level VI)
Wattage :
6W~36WFeatures :
Medical safety approved (2xMOPP), BF applications
Energy efficiency Level VI (GSM06 and GSM18/25/36 5~9V for Level V)
No load power consumption <0.075W~0.3W
Comply with EISA/DoE, NRCan, MEPS, ErP and meet CoC Version 5
2 pole USA plug(U type)/EURO plug(E type) for GSM series, interchangeable type for GEM series
DC plug changeable (MOQ may be required)
3 years warranty
Moistureproof - Desktop
Wattage :
60W~120WFeatures :
IP67 design for power body
Energy efficiency Level VI
No load power consumption <0.15W
E-Type: EU ErP and meet CoC Version 5 (OWA-60E/90E);
U-Type: EISA 2007/DoE and NRCan
Class II (no FG)
5 years warranty
AC/DC > KNX- KNX
KNX Power
Wattage :
20WFeatures :
EIB/KNX power supply with integrated choke
30VDC/640mA
Compact size with 3SU (52.5mm) width
1∅, 180~264VAC input
No load power consumption <0.5W
Assemble on industrial rail TS-35 / 7.5 or 15
Model
Power： KNX-20E-640KNX to DALI Gateway
Wattage :
NAFeatures :
KNX proof gateway
Easy configuration & installation
Connect up to 64 DALI drivers
Built-in DALI power supply
LCD 2x12 display
Lighting control via the button
Lighting control via the integrated web server
Up to 16 DALI lighting groups setting
Up to 16 DALI scenes setting
3 year warranty
Model
Gateway： KDA-64KNX-USB Interface
Wattage :
NAFeatures :
KNX-USB interface
No additional external power supply required
KNX commissioning, addressing and parameter settings
KNX protocol and system visualization
Diagnostic operations
Long messages up to 220 byte APDU
3 years warranty
Model
USB Interface： KSI-01UKNX IP Router
Wattage :
NAFeatures :
KNX IP router
4 IP/TP tunnelings
No additional external power supply required
Universal Plug and Play
Telegram filtering
Built-in web front-end page
3 years warranty
Model
IP Router： KSR-01IPAC/DC > Charger- External Battery Charger
Stationary Charger
Wattage :
300W~1600WFeatures :
Chargers for lead-acid and Li-ion batteries
3-stage charging curve: PB-300/360, 2/3/8-stage charging curve: PB-600/1000, 3-stage charging curve suitable for harsh environment applications: HEP-600C
Intelligent charger with programmable 3-stage charging curve: RPB-1600/RCB-1600
5 years warranty for RPB-1600/RCB-1600, 6 years warranty for HEP-600C
Green Desktop Charger
Desktop Charger
AC/DC > Accessory - Mounting Accessories
DRL-01
DRL-02
DRL-03A
DRP-01
DRP-01A
DRP-02
DRP-03
DRP-04
MHS012
Wattage :
Features :
Suitable for case : 206, 207, 912, 915, 916, 935, 939, 940, 977, 980, 982, 986, 987, 995
Model
： MHS012MHS013
MHS014
MHS025
MHS026
MHS027
DC/DC > Din Rail- Din Rail
DDR Series
Wattage :
15~240Features :
4:1 wide input range(DDR-15~60)
2:1 input range(DDR-120~240)
Fanless design, coopng by free air convection
High efficiency up to 92.5%
Protections: short circuit / overload / over voltage / input reverse polarity / input under voltage
LED power indicator
Suitable for DIN rail types: TS-35/7.5 or TS-35/15
4KVdc I/O isolation (reinforced isolation)
Ultra slim dimensions
3 years warranty
DC/DC > Module Type- Module Type
SMD Package
SIP Package
Wattage :
1W~6WFeatures :
Regulated and unregulated models
±10% or 2:1 wide input range
On board module type, assemble on the main PCB of the system
DIP Package
DIP - 1.25" x 0.8" Footprint
Wattage :
3W~20WFeatures :
DIP24 package
2:1 (standard), 4:1 (option) wide input
1~1.5KVDC (standard), 3KVDC (option) isolation
Single and dual output models
DIP - 1" x 1" Footprint
DIP - 2" x 1" Footprint
Wattage :
5W~50WFeatures :
DIP package
2:1 (standard), 4:1 (option) wide input
1~1.5KVDC (standard), 3KVDC (option) isolation
Single and dual output models
Remote ON/OFF control, remote sense, trimming output ±10% by models
DIP - 2" x 2" Footprint
DC/DC > On Board Type - On Board Type
NID Series
DC/DC > Enclosed Type - Enclosed Type
RSD Series
SD Series
Wattage :
15W~1000WFeatures :
2:1 wide input range (4:1 for SD-500/1000)
1.5~2KVAC isolation by models
1U low profile (41mm) for SD-1000
12V/0.25A auxiliary output for SD-500/1000
Built-in remote ON/OFF control and remote sense for SD-500/1000
DC/AC > Modified Sine Wave-
A301/302 Series
Wattage :
100W~2500WFeatures :
Modified sine wave output, suitable for resistive load
Low cost
1 year warranty
Model
： A301,302-100 / A301,302-150 /A301,302-300 / A301,302-600 /A301,302-1K0 / A301,302-1K7 /A301,302-2K5DC/AC > True Sine Wave -
TN Series
Wattage :
1500W~3000WFeatures :
True sine wave with solar charger & by-pass function
High surge power up to 200%
Output voltage / frequency adjustable
Conformal coating
Computer-based monitoring software, recommended for Windows 7 and Windows 8 Operating System (English and Chinese version)
3 years warranty
TS Series
DC/AC > Solar Inverter - Solar Inverter
ISI Series
Wattage :
500WFeatures :
ISI-500: Modified sine wave with MPPT solar charger
ISI-501: True sine wave with MPPT solar charger
High surge power up to 200%
2 years warranty (ISI-500), 3 years warranty (ISI-501)